3D Printing Through To Painting

Last updated 6/2020
MP4 | Video: h264, 1280×720 | Audio: AAC, 44.1 KHz
Language: English | Size: 2.37 GB | Duration: 2h 5m
Learn the process to go from filament to a display piece to get professional level final results

What you’ll learn
3D printing
How to use slicer software
Post Processing
Tricks to quickly smooth 3D prints.
Where to find 3D models to print
Have access to a 3D printer
Have access to a computer
3D printing can be an intimidating process, but once you’ve learned the basics its actually quite simple to get high quality results. This course will quickly get you through the learning curve, and I’ve included a professional 3D model to use along the way.Having a high quality and exciting 3D model can help keep you motivated throughout the learning process, that’s why I’ve included the Cthulhu bust that you see in the thumbnail image with this class. This model was specifically designed to be highly detailed but still simple to print for beginners. The model alone would cost more than the full price of this course.I’ve done literally thousands of prints for everything from 1in prototypes to 12 foot tall displays (you read that right, 12 Feet). In this course I will help you avoid the trial and error I went through and benefit from the knowledge I gained through thousands of hours printing.Other classes will stop at getting a simple print, but I will take you through the process of quickly smoothing and painting your print using tricks I’ve learned from my experience in the trade show industry to get you professional level final results.I’ve been training people in various skills for over 9 years and I’ve used my teaching experience to make each lecture clear, concise, and highly informative.
Section 1: Introduction
Lecture 1 Introduction
Section 2: Using your slicer software
Lecture 2 Where to get 3D models
Lecture 3 Using IdeaMaker Slicer
Lecture 4 Using Cura Slicer
Lecture 5 FDM/FFF Printer Settings
Lecture 6 Using ChiTuBox (resin printers only)
Lecture 7 (Bonus) How To Smooth Faceted 3D Models
Section 3: Printing
Lecture 8 FDM/FFF (plastic) Printer Basics
Lecture 9 Leveling The Print Bed and Print Bed Adhesion
Lecture 10 Starting Your Prints
Lecture 11 SLA (resin) Printer Basics
Lecture 12 SLA Bed Leveling
Lecture 13 SLA Adding Resin and Starting Your Print
Lecture 14 Troubleshooting Printer Issues (FDM and SLA)
Section 4: Post Processing
Lecture 15 Pulling Prints and Removing Supports
Lecture 16 Pulling and Cleaning SLA Prints
Lecture 17 Priming (base coat)
Lecture 18 Smoothing Prints The Easy Way
Lecture 19 Smoothing The Hard Way (and ways to make it easier)
Section 5: Painting
Lecture 20 Zenithal Shading/Priming
Lecture 21 Masking Tips
Lecture 22 Applying Base Coat
Lecture 23 Hand Painting Tips
Lecture 24 Painting Timelapse
Lecture 25 (Bonus) Staining Wooden Prints
Section 6: Closing remarks and final tips
Lecture 26 You finished the course!
Beginners who want to learn how to go from filament to a display piece,People who know how to 3D print but want tricks on how to improve their results,Experienced 3D printers who want to learn how to post process



Please Download Link Hight Speed | Support Download Unlimited Speed


Links are Interchangeable – No Password – Single Extraction

Direct Link Download

Leave a Reply

Your email address will not be published.